ZyXEL NBG-416N User Guide
Chapter 9 LAN
NBG-416N User’s Guide
93
9.3 LAN IP Screen
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 55 Network > LAN > IP
The following table describes the labels in this screen.
Table 36 Network > LAN > IP
LABEL
DESCRIPTION
IP Address
Type the IP address of your NBG-416N in dotted decimal notation
192.168.1.1 (factory default).
192.168.1.1 (factory default).
IP Subnet Mask
The subnet mask specifies the network number portion of an IP
address. Your NBG-416N will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG-416N.
address. Your NBG-416N will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG-416N.
Apply
Click Apply to save your changes back to the NBG-416N.
Reset
Click Reset to begin configuring this screen afresh.