Sharp MX-2300N User Guide

This setting is used to adjust the exposure level for 
scanning in document filing mode.

• Exposure

The exposure can be adjusted automatically or 
manually. Select either the [Auto] key or the [Manual] 
key. If you selected [Manual], specify the exposure 
with the 

 keys. Lower the level toward "1" for 

lighter exposure or raise the level toward "5" for darker 
exposure.

• Original Image Type

The exposure mode can be selected to match the 
original type. Select the desired key.

• Text/Prtd. Photo
• Text/Photo
• Text
• Photo*
• Printed Photo*
• Map*

* Does not appear when the exposure is set to [Auto].

• Moiré Reduction

To reduce the moiré effect when scanning, select the 
[Moiré Reduction] checkbox 

.

The transmission resolution can be set to one of the 
following resolutions.

• 100X100dpi
• 200X200dpi
• 300X300dpi
• 400X400dpi
• 600X600dpi

Select one of the keys and touch the [OK] key.

[Low], [Medium], or [High] can be selected for the 
compression ratio for transmission of a stored color file.
Select one of the keys and touch the [OK] key.

(When a right tray is installed.)
This setting is used to select the default output tray for 
printing a file stored by Scan to HDD.
The items that appear will vary depending the machine 
configuration.
Select one of the keys and touch the [OK] key.

This setting adjusts the volume of the beep that sounds 
when scanning ends. The beep can also be turned off.

Select one of the keys and touch the [OK] key.

This function deletes all files except protected files from 
the Quick File Folder.
To delete all files, touch the [Delete] key.
To have all files except protected files automatically 
deleted from the Quick File Folder when the [POWER] 
key (

) is switched "on", select the [Delete quick files 

at power up. (Protected files excluded)] checkbox 

.

When a stored file is called up and printed, this setting 
prohibits the selection of a "Stamp" setting in the special 
modes. If a stamp setting is already selected, it will not be 
possible to change the stamp setting. 
This function can be used to prevent inconsistencies in 
the printed information, such as that of the original date 
in the file and the date the file is called up and printed.
To enable this setting, select the checkbox 

 and touch 

the [OK] key.

When printing files by batch printing, this setting is used 
to prohibit the selection of the [All Users] key and the 
[User Unknown] key in the user selection screen.
Select the checkboxes 

 of the items below that you 

wish to prohibit and touch the [OK] key.

• Selection of [All Users] is not allowed.
• Selection of [User Unknown] is not allowed.

System Settings

Default Exposure Settings

Auto

Text

Printed 

Photo

Manual

OK

Photo

Map

1

3

5

.

.

Text/

Prtd.Photo

Text/Photo

Moiré

Reduction

System Settings

Scan Complete Sound Setting

Scan Complete Sound

OK

Volume: 
Small

Volume: 
Middle

Volume: 
Big

No Sound