ONKYO DS-A3 User Manual

 

17

 

■

 

• Make sure your iPod is actually playing.
• Make sure your iPod is inserted properly in the RI 

Dock.

• Make sure your amp is turned on, the correct input 

source is selected, and the volume is turned up.

• Make sure the plugs are pushed in all the way.
• Make sure the AC adapter is connected to a suit-

able wall outlet and connected to the RI Dock.

 

■

 

• If the RI Dock is placed on top of another compo-

nent, the remote controller’s signal may be 
obstructed and the remote controller may not 
work reliably. In this case, try repositioning the RI 
Dock.

• Make sure your iPod is properly inserted in the RI 

Dock.

• When you use the RI Dock’s remote controller, 

point it toward the RI Dock (see page 8).

• Some of the remote controllers buttons work dif-

ferently depending on the OSD mode: On or Off 
(see page 7).

 

■

 

• Make sure your iPod is properly inserted in the RI 

Dock.

• If your amp’s remote controller has remote mode 

buttons, make sure you’ve selected the right 
mode.

• Check the RI Dock’s RI MODE switch setting.
• When you use your amp’s remote controller, point 

it toward your amp.

• The RI Dock must be connected to your amp with 

both an 

 cable and an audio cable.

• Make sure the RI Dock’s RI MODE switch setting 

and the remote control mode match this setting. 
See your amp’s manual for more information. 
If you still can’t control your iPod, start playback by 
pressing your iPod’s Play button. Remote opera-
tion should then be possible. 

• Make sure your amp’s remote controller is set to 

the correct remote control ID.

 

■

 

• Set the OSD mode to On (see page 10).
• Try setting the TV system to PAL or NTSC (see 

page 14).

• Select the video output mode (composite/compo-

nent) according to the video input on your TV (see 
page 10).

 

■

 

• Set the OSD mode to Off, and use your iPod’s con-

trols or remote controller to select and start the 
slideshow or video.

   #