Sharp MX-M1100 Operating Guide

To enable the original to be scanned in the correct orientation 
(the orientation of the top edge of the original that is shown at 
the top of the display), specify the orientation in which the 
original was placed in step 1.

If the top edge of the original is up, touch the 

 key. If 

the top edge of the original is to the left, touch the 

 

key.

You will return to the screen of step 3.

The original orientation is initially set to 

. If the original was placed with the top edge up, this step is not 

necessary.

Scanning begins.

• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one 

page, go to step 7. To scan more pages, go to the next step.

• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission 

will take place.

• If the color expansion kit is installed and the color mode is set to [Auto], the color used in the original is automatically 

detected and scanning takes place in full color, grayscale, or mono2. If the color expansion kit is not installed, 
scanning takes place in mono2.

• If the file type is [Encrypt PDF], a password entry screen will appear when the [START] key (

) is pressed.

Touch the [Entry] key to open the keyboard screen, enter a password (maximum of 32 characters), and touch the 
[OK] key. The recipient must use the password entered here to open the encrypted PDF file.
To cancel encrypted PDF, touch the [Cancel] key. The format settings screen will appear to let you change the file 
type. Select a new file type and press the [START] key (

) to begin transmission.

Scan/Original

OK

Auto

Auto   8½x11

Scan Size

2-Sided
Tablet

2-Sided
Booklet

Send Size

100%

Image Orientation

Entry

Cancel

Please enter encrypt PDF

password.