Sharp xg-nv7xu Quick Setup Guide
Quick Reference for Notevision 7
A. Connecting the Power Cord
Plug the supplied power cord into the AC socket on the back of the
projector.
projector.
Digital Multimedia Projector
4 Press
POWER ON
.
B. Connecting to a Computer Using the
Standard 15-pin (VGA) Input
1 Connect one end of the supplied computer cable to the INPUT
1 port on the projector.
2 Connect the other end to the Monitor output port on the
computer. Secure the connectors by tightening the thumb
screws.
screws.
3 To use the built-in audio system, connect one end of the
supplied computer audio cable to the AUDIO INPUT terminal
on the projector.
Connect the other end to the Audio output terminal on the
computer.
on the projector.
Connect the other end to the Audio output terminal on the
computer.
C. Connecting to a Computer Using the
Direct Digital Input (PanelLink™)
1 Connect one end of the digital cable to the INPUT 2 port on the
projector.
2 Connect the other end to the corresponding terminal on a
computer.
3 To use the built-in audio system, connect one end of the
supplied computer audio cable to AUDIO INPUT terminal on
the projector.
Connect the other end to the Audio output terminal on the
computer.
the projector.
Connect the other end to the Audio output terminal on the
computer.
Computer
To digital output terminal
To audio output terminal
Computer audio cable (3.5 mm
stereo minijack cable)
stereo minijack cable)
Digital cable (sold separately)
POWER ON
button
5 Turn on the computer.
6 Press
6 Press
AUTO SYNC
to adjust the image.
AUTO SYNC
button
D. Connecting the Remote Mouse Receiver
IBM or IBM compatible PC
1 Connect one end of the supplied mouse control cable to the
corresponding terminal on the PC.
2 Connect the other end to the remote mouse receiver.
Macintosh
1 Connect the mouse control serial cable to the remote mouse
receiver.
2 Connect the mouse control cable for Mac to the Mac ADB
port on the Mac.
3 Connect the other end of the mouse control cable for Mac to
the mouse control serial cable.
• Make sure that your computer is turned off while making any mouse control
cable connections.
• When using the wireless mouse with an IBM or IBM compatible PC, you
can use either a PS/2 or serial cable connection. (See diagram below.)
• Use the supplied mouse control cable for Mac when using the remote
mouse receiver with a Macintosh computer.
Mouse control
serial cable
Mouse control cable for IBM PS/2
Use this terminal to connect the
supplied mouse control cable
to the remote mouse receiver.
supplied mouse control cable
to the remote mouse receiver.
Remote mouse receiver
Mouse control
cable for Mac
XG-NV7XU/QR (E)
99.11.8, 2:07 PM
1