Allied Telesis AT-MC13 AT-MC13-60 Leaflet
Product codes
AT-MC13-60
FIBER CONNECTIONS
The Allied Telesyn range of Ethernet media converters
provides a complete family of conversion devices, allow-
ing users to extend the size of UTP networks with the use
of fiber cabling. Supporting all major fiber connectors,
with support for both multi and single-mode fiber, these
converters can be used to extend networks with up to
15km of fiber.
The Allied Telesyn range of Ethernet media converters
provides a complete family of conversion devices, allow-
ing users to extend the size of UTP networks with the use
of fiber cabling. Supporting all major fiber connectors,
with support for both multi and single-mode fiber, these
converters can be used to extend networks with up to
15km of fiber.
AUTO-NEGOTIATION AND MISSINGLINK
TM
When connecting media converters to auto-negotiating
Fast Ethernet switches, these media converters (except
the AT-MC13 & AT-MC14) will automatically connect
the link in either Ethernet Full or Half-Duplex mode,
allowing the link to be established with the greatest
bandwidth. In addition, the Missing Link feature (except
AT-MC15) allows switches or hubs with redundant link
capability to be inter-connected with these media con-
verters, as a failure in one fiber link will be signalled to
the switch, allowing the second link to become active.
Fast Ethernet switches, these media converters (except
the AT-MC13 & AT-MC14) will automatically connect
the link in either Ethernet Full or Half-Duplex mode,
allowing the link to be established with the greatest
bandwidth. In addition, the Missing Link feature (except
AT-MC15) allows switches or hubs with redundant link
capability to be inter-connected with these media con-
verters, as a failure in one fiber link will be signalled to
the switch, allowing the second link to become active.
SIMPLE INSTALLATION
All the media converters with a UTP connection feature an
internal MDI/MDIX switch, allowing the converter to be
connected to either a PC, hub or switch, with a simple UTP
cable. The media converters also allow the installer to test
the integrity of the fiber connection, by forcing the con-
verters to communicate over the fiber cable. This “Link
Test” feature allows installers to check for cable faults with-
out the need for expensive fiberoptic test equipment.
All the media converters with a UTP connection feature an
internal MDI/MDIX switch, allowing the converter to be
connected to either a PC, hub or switch, with a simple UTP
cable. The media converters also allow the installer to test
the integrity of the fiber connection, by forcing the con-
verters to communicate over the fiber cable. This “Link
Test” feature allows installers to check for cable faults with-
out the need for expensive fiberoptic test equipment.
STANDALONE OR RACKMOUNTED
Each small media converter is powered by an external
power supply unit for use in standalone applications.
Where multiple media converters are being used, up to 12
standalone devices can be inserted into a low cost rack-
mount chassis, allowing all the converters to be powered
by a single internal power supply. In critical applications,
a second load sharing internal power supply can be
installed into the rackmount chassis.
Each small media converter is powered by an external
power supply unit for use in standalone applications.
Where multiple media converters are being used, up to 12
standalone devices can be inserted into a low cost rack-
mount chassis, allowing all the converters to be powered
by a single internal power supply. In critical applications,
a second load sharing internal power supply can be
installed into the rackmount chassis.
ABOUT ALLIED TELESYN, INC.
Allied Telesyn, Inc. leads the world in network technolo-
gies for the access edge. Since the company's inception in
1987, Allied Telesyn has been developing IP-based net-
work products for use in video, voice and data networks
at the metro edge, in education, government agencies and
across the enterprise. Allied Telesyn's access, aggregation
and core transport technologies range from simple
Ethernet adapters, hubs and media converters to robust
multi-layer Gigabit Ethernet switches and routers, wire-
less systems, DTM and WDM transport solutions for
delivering real-time voice, video and data. Allied Telesyn's
comprehensive support and professional service pro-
grams are suited to meet the growing demands of today's
switched broadband infrastructures.
Allied Telesyn, Inc. leads the world in network technolo-
gies for the access edge. Since the company's inception in
1987, Allied Telesyn has been developing IP-based net-
work products for use in video, voice and data networks
at the metro edge, in education, government agencies and
across the enterprise. Allied Telesyn's access, aggregation
and core transport technologies range from simple
Ethernet adapters, hubs and media converters to robust
multi-layer Gigabit Ethernet switches and routers, wire-
less systems, DTM and WDM transport solutions for
delivering real-time voice, video and data. Allied Telesyn's
comprehensive support and professional service pro-
grams are suited to meet the growing demands of today's
switched broadband infrastructures.
SERVICE & SUPPORT
Allied Telesyn provides value-added support services for
its customers under its Net.Cover
Allied Telesyn provides value-added support services for
its customers under its Net.Cover
SM
programs. For more
information on Net.Cover
SM
support programs available
in your area, contact your Allied Telesyn sales represen-
tative or visit our website.
tative or visit our website.
www.alliedtelesyn.com
AT-MC10 Series, Ethernet Media Converters
KEY FEATURES
Half and Full
Duplex operation
(Excluding AT-MC15,
Half Duplex only)
Duplex operation
(Excluding AT-MC15,
Half Duplex only)
Fits the AT-MCR12
rackmount chassis
rackmount chassis
MDI/MDIX
MissingLink
TM
(Excluding AT-MC15, N/A)
Link Test
(Excluding AT-MC15, N/A)
(Excluding AT-MC15, N/A)
MEDIA CONVERTERS
AT-MC13, UTP to fiber ST Ethernet media converter
AT-MC14, UTP to fiber SC Ethernet media converter
AT-MC15, UTP to BNC Ethernet media converter
AT-MC16, UTP to fiber ST single-mode Ethernet media converter