Sharp lc-19d45u User Guide

Simple button operations for
changing channels

You can change channels in several ways.

• When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

• When you enter 0-9 only, channel selection will be made if

there is no operation within a few seconds.

To select a 3-digit channel number
(e. g., Channel 115):

Press 1s1s5sENT

To select a 4-digit channel number
(e. g., Channel 22.1):

Press 2 s2s • (DOT) s1sENT

• When you enter 0–9 only, channel selection will be made if

there is no operation within a few seconds.

• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and • (DOT), channel selection will be

made if there is no operation within a few seconds.

Method 1

Using CH r/s on the remote control unit, on the
kitchen remote control unit or on the TV.

Method 2

1 Press FLASHBACK to switch to the previously

tuned channel.

2 Press FLASHBACK again to switch back to the

currently tuned channel.

• FLASHBACK will not work if no channel has been

changed after the TV is turned on.

Method 3

Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.

To select a 1 or 2-digit channel number
(e. g., Channel 5):

Press 5sENT

Watching TV

Displaying the receiving channel
information

Press DISPLAY once. The display appears
as shown on below. If the viewing channel is
a digital channel, the information of channel
number, audio service type, broadcast station,
program information and V-Chip rating will
appear.

Press DISPLAY again to return to normal
screen.

• The channel information will disappear if there is no

operation within a few seconds.

(While viewing digital
channel)

(While viewing analog
channel)

Ratings

SAP ( ST )
1/4 CC1

AUDIO

STEREO

AIR DIGITAL

2.1