Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sharp
  4. lc-19d45u
  5. User Guide

Sharp lc-19d45u User Guide

Download
Page of 60
4
Press MENU and the MENU screen displays.
1
Press c/d to select “Power Control”, and 
then press ENTER.
•  Power control menu displays.
2
Press a/b to select “Power Management”, 
and then press ENTER.
3
Press a/b to select “Mode 1” or “Mode 2”, 
and then press ENTER.
4
Off 
Mode 1
Mode 2
NOTE
•  If you turn off the power by disconnecting AC cord when 
setting “Mode 2” in power management, the TV may not 
function properly after turning the power on again. In such 
case, press POWER on the remote control unit.
• Pressing POWER on the display will have the same result.
•  In Mode1, fi ve minutes before the preset of time expires, 
the remaining time displays each minute.
Selected item
Off
Mode 1
Mode 2
Description
• No power management 
• Factory preset value.
• If no signal inputs for approximately 8 
minutes, the power shuts down.
• Even if you start using the PC and the 
signal inputs again, the TV stays off.
• The TV turns on again by pressing 
POWER. (See page 17.)
• If no signal inputs for approximately 8 
seconds, the power shuts down.
• When you start using the PC and the 
signal inputs again, the TV turns on.
• The TV turns on again by pressing 
POWER. (See page 17.)
 
30
Power Control
Power control setting allows you to save energy.
No signal off
When set to “Enable”, the power will automatically shut 
down if there is no signal for 15 minutes.
•  “Disable” is the factory preset value.
•  When a TV program fi nishes, this function may not operate.
•  “Disable” is the factory preset value.
No operation off
The power will automatically shut down if there is no 
operation for 30 minutes or 3 hours after setting.
Press MENU to display the MENU screen, and 
then press c/d to select “Power Control”.
Press a/b to select “No Operation Off”, and 
then press ENTER.
Press a/b to select “30min” or “3Hour”, and 
then press ENTER.
•  Five minutes before the power shuts down, the 
remaining time displays every minute.
Basic adjustment settings
1
3
2
1
2
3
Press MENU to exit.
4
Press MENU to exit.
Press MENU to display the MENU screen, and 
then press c/d to select “Power Control”.
Press a/b to select “No Signal Off”, and then 
press ENTER.
Press a/b to select “Enable”, and then press 
ENTER.
•  Five minutes before the power shuts down, the 
remaining time displays every minute.
Power Management
You can set the TV to automatically power off when no 
image is displayed on PC.
Enable
Disable