Sharp lc-19d45u User Guide

Ordinarily you can easily adjust the picture as 
necessary to change image position using Auto Sync. 
In some cases, however, manual adjustment is needed 
to optimism the image. 

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

This function enables the screen to be automatically 
adjusted to its best possible condition when the analog 
terminals of the TV and PC are connected with a 
commercially available RGB cable, etc.

Press a/b to select “Yes”, and then press 
ENTER.

•  Auto Sync. starts.

•  Auto Sync. is likely to succeed when an input PC image 

has wide vertical stripes (e.g. pattern with high contrast 
stripes, or cross-hatched). 

  It may fail when an input PC image is solid (low contrast).
•  Be sure to connect the PC to the TV and switch it on 

before starting Auto Sync.

Press a/b to select “PC Setup”, and then 
press ENTER.

Press a/b to select “Auto Sync.”, and then 
press ENTER.

Yes 

No 

Input Signal 

Auto Sync. 

Fine Sync. 

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Fine Sync.”, and then 
press ENTER.

Press a/b to select a specifi c adjustment 
item among “H-Pos.”, “V-Pos.”, “Clock” and 
“Phase”.

Reset 

H-Pos.

[ 90] 

a b 

a b 

a b 

a b 

V-Pos.

Clock 

Phase 

[ 60] 

[ 90] 

[   8] 

Press c/d to adjust the item to your desired 
position.

•  For resetting all adjustment items to the factory preset 

values, press a/b to select “Reset”, and then press 
ENTER.

•  Images may not be displayed properly depending on the 

settings and/or input signals.

Centres the image by moving it to the left 
or right.

Centres the image by moving it up or 
down.

Adjusts when the image fl ickers with 
vertical stripes.

Adjusts when characters have low 
contrast or when the image fl ickers.

Press a/b to select “PC Setup”, and then 
press ENTER.

Press MENU to exit.

Press MENU to exit.

Press a/b to select “Yes”, and then press 
ENTER.