SVP cdc-1050 User Guide
Basic Function Buttons
This section will explain the basic function buttons to instantly
operate this camera.
Self-timer: The self-timer function is used in any of the following
modes: capture, scene, and movie. A tripod is highly recommended
when using the self-timer. Press the left button to select self-timer.
When the icon appears on the LCD, press the shutter button to
activate. To set the time frame for the self-timer, select “Menu”
followed by the setup function.
Continuous shot: This function allows 3 continuous shots.
Press the left button twice to activate this function.
NOTE:
1. Turn off the Flash prior to using the continuous shot function.
2. Under continuous shot, the flash will remain inactive.
3. If the internal or SD card has run out of memory, the continuous
2. Under continuous shot, the flash will remain inactive.
3. If the internal or SD card has run out of memory, the continuous
shot will not function.
4. Once instant review is selected, the picture displayed on the
LCD will be the last frame taken.
5. While in the continuous shot function, the LCD will remain off
until the 3 frames have been executed.
6.
6. Under resolution 8.0M/10.0M (SW interpolation), the
continuous shot will remain inactive.
continuous shot will remain inactive.
6
Pri
or to O
or to O
per
at
in
g t
he Cam
er
a