SVP dc-12m User Manual
A
djusting the camer
a
settings using the menus
User Manual
18
Exposure Settings
By using the Exposure Adjusting menu, you can set the quantity
of light entering into the camera when you take picture. The EV
compensation is expressed as a single number that is used by
the digital camera to calculate the correct combination of aper-
ture and shutter speed for producing optimum quality pictures.
Setting a higher EV compensation value will over-expose a shot
while setting a lower value will under-expose a shot. Exposure
can be adjusted from –2.0 to +2.0. The value is shown on the LCD
display. To change the EV compensation value, do the following:
of light entering into the camera when you take picture. The EV
compensation is expressed as a single number that is used by
the digital camera to calculate the correct combination of aper-
ture and shutter speed for producing optimum quality pictures.
Setting a higher EV compensation value will over-expose a shot
while setting a lower value will under-expose a shot. Exposure
can be adjusted from –2.0 to +2.0. The value is shown on the LCD
display. To change the EV compensation value, do the following:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
2. Press Menu.
3. Move the 5-way button left or right to
navigate to the Capture menu.
4. Move the 5-way button up or down to
highlight the EV adjust submenu.
5. Move the 5-way button right to open
the EV adjust submenu.
6. Move the 5-way button up or down to
adjust the EV value between -2.0
through +2.0. Select Normal for the
default value.
through +2.0. Select Normal for the
default value.
7. Press OK when finished.