Polaroid ads-1000 Operating Guide

- 19 - 

 

Auto Memory 
Use the ▼、▲ buttons to select Auto Memory, press the ENT button to enter auto 
memory mode: 
 
 

The auto memory will take a few minutes. The unit will search channels from the 

lowest channel to the highest channel in the standard channel list.    When tuning 

operations are complete the unit will exit and store the channels by sequence in the 

memory. 

During tuning, press the ◄ button to exit the auto memory.   

Use the ▼、▲ direction buttons to select the desired channel from those in memory. 

Press the SET button on the remote control to enter Timer setup menu, the screen will 

display as below: 

 

Use the ▼、▲ buttons to select the item you want to set. 
Use the ►, ◄ buttons to enter the item and to select. 
Press the SET button again on the remote control to exit the setup menu. 
 
Timer 
Use the ►, ◄ direction buttons to select ON or OFF. This function allows you to set 
the start time and end time of the desired signal source. No matter what mode the unit 
is in, it will automatically start the playback of the desired signal source. 

Select ON to activate the function; select OFF to disable the function. 

TIMER SET   

TIMER   

                                   

OFF

POWER ON                            _ _: _ _ am 
POWER OFF                          _ _: _ _ am 
SIGNAL                                              CATV
CHANNEL                                            002 
 
Exit: SET 

SEARCHING          CH：009 
 

 

EXIT：

◄