Polaroid fla-1512b User Guide

9 

1.  Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 
2.  Connect the output terminal of RF cable to the corresponding TV RF signal input terminal. 

The LCD TV is a high technology digital product, use quality RF cables to obtain optimal 
results. 

3.  Connect the output terminal of the AV devices such as DVD player, VCR, etc. to the 

corresponding terminal of your LCD TV. 

4.  Connect one end of the D-sub terminal to the corresponding terminal of the host computer, 

and connect the other end to the corresponding LCD TV terminal. Screw down the screws 
on both sides to secure it.   

damage the pins in the connector. 
5. Ensure that every AV signal cord is correctly connected to the corresponding jack. 
6. Put the DC power plug in the DC input outlet of the TV, then plug the AC power plug of the 

power adapter in the AC power outlet. 

 

After the power cord is plugged into the power socket, the TV will enter Standby mode. 

Press          on the remote control or the front panel to turn the TV on 

To Turn the TV Off 
1. Press          on the remote control or the front panel to turn the TV off. 

2. Unplug the DC power adapter from the AC wall outlet and then unplug the power adapter 

from the TV to turn the set off completely. 

power adapter from the AC outlet if this happens. The last used TV mode will 
appear when power resumes. 

Unplug the power adapter from the AC outlet if power is suddenly interrupted.