Luxeon d512pf User Guide
M
AINTENANCE AND
S
ECURITY
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
replacement part, which you can order from your local dealer.
Important:
1. The lamp contains a certain amount of mercury and should be disposed of according to local or-
dinance regulations.
dinance regulations.
2. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.
Warning:
Be sure to turn off and unplug the PC Free at least an hour before replacing the lamp. Failure to do
so could result in a severe burn.
so could result in a severe burn.
1.
Loosen the screw on
the lamp compartment
cover.
the lamp compartment
cover.
2.
Remove the lamp
compartment cover.
compartment cover.
3.
Loosen the two screws
from the lamp module.
from the lamp module.
4.
Lift the module handle
up.
up.
5.
Pull firmly on the
module handle to re-
move the lamp module.
module handle to re-
move the lamp module.
6.
Reverse steps 1 to 5 to
install the new lamp
module.
install the new lamp
module.