Brother QL-1060N Owner's Manual

Potential types of problems

Introduc

• The printed barcode

cannot be read.

• Depending on the type of the

scanner, it cannot be read. Use
different scanner. We recommend
to print the barcode with print
setting as Give priority to quality.
Also, set the label vertical to the
print head as shown right.

• I want to reset the printer/

delete the data
transferred from PC.

• To reset the printer, turn OFF the printer. Press ON/OFF button and CUT

button six times. All the transferred data from PC will be deleted and reset the
machine to factory setting.

• I want to cancel the

current printing job.

• Make sure that the printer is ON, and press ON/OFF button.

• When printing via the USB

cable, the printer
repeatedly pauses and
then continues printing.

• Is the printer set for sequential printing?

If so, set print mode to buffered printing.
(Open printer properties from [Control
Panel]-[Printer and FAX] and click [Printing
Preferences...] button in the [General] tab.
Choose the option "After one page of data
is received".)

• An alternative solution is to disconnect the

LAN cable until USB printing is completed.

Problem

Solution

Label

head

Recom-

mended

direction