Jet jpm-13cs User Guide
7
4. The planer/molder with a 230 volt plug should only be connected to an outlet having the same
configuration as illustrated by the grounded outlet box in Figure 3. No adapter is available or should be
used with the 230 volt plug.
used with the 230 volt plug.
Important: In all cases (115 or 230 volts), make certain the receptacle in question is properly grounded.
If you are not sure, have a registered electrician check the receptacle.
If you are not sure, have a registered electrician check the receptacle.
Figure
2a Figure
2b
Figure 3
6.0 On-Off Switch Padlock
To safeguard your machine from unauthorized operation and to avoid accidental starting by young children, the
use of a padlock (not provided) is highly recommended.
use of a padlock (not provided) is highly recommended.
To lock out an on-off switch (see Figure 4):
1. Open the padlock.
2. Insert through holes in the start button.
3. Close the padlock.
4. Place the key in a safe location.
Figure 4