Jet jovs-10 User Manual

Contents of the Shipping Container

1. Sander
3. Table

Insert

Rings

2. Spindle

Wrenches

1. 2mm

Hex

Wrench

10 Removable Spindles

1/4” x 5” Steel and Sanding Sleeve
3/8” x 6” Steel and Sanding Sleeve
1/2” x 6” Steel and Sanding Sleeve
5/8” x 6” Steel and Sanding Sleeve
3/4” x 9” Steel and Sanding Sleeve
1” x 9” Rubber and Sanding Sleeve
1-1/2” x 9” Rubber and Sanding Sleeve
2” x 9” Rubber and Sanding Sleeve
3” x 9” Rubber and Sanding Sleeve
4” x 9” Rubber and Sanding Sleeve

1 Owner's

Manual

1 Warranty

Card

Tools Required for Assembly &
Adjustments

1. 26mm Wrench or Large Adjustable Wrench
1. 6mm

Hex

Wrench

1. Square

WARNING

Read and understand the entire contents of

this manual before attempting assembly or

operation of the sander!

Failure to comply may cause serious injury!

Unpacking

1.  Remove all contents from shipping carton.

2.  Report any damage to your distributor.

3.  Do not discard any shipping material until

the sander has been assembled and is
running properly.

4. With help from another person move the

sander off of the pallet and into the desired
position.

5. Remove the protective coating found on the

table with a putty knife and a cleaning
solvent that will not damage painted
surfaces.

Note: Now is a perfect time to set your sander
up on a mobile base. It will make life easier in
the woodshop. JET has a Heavy Duty Universal
Mobile Base that will fit this sander. JET also
has a variety of Dust Collectors and Air Filtration
Units that will work nicely with your new sander.