Brother HL-8050N Quick Setup Guide
39
■
Other Information
If for any reason you must ship your Printer, carefully package the Printer to avoid any damage
during transit. It is recommended that you save and use the original packaging. The Printer
should also be adequately insured with the carrier.
during transit. It is recommended that you save and use the original packaging. The Printer
should also be adequately insured with the carrier.
When shipping the Printer, the TONER CARTRIDGE must be removed from the Printer
and placed in the foil bag. Failure to remove the unit and place it in the foil bag during
shipping will cause severe damage to the Printer and may VOID THE WARRANTY.
and placed in the foil bag. Failure to remove the unit and place it in the foil bag during
shipping will cause severe damage to the Printer and may VOID THE WARRANTY.
1
Turn off the printer power switch, and then
unplug the AC power cord.
unplug the AC power cord.
2
Remove the toner cartridge from the printer.
Place it in the plastic bag and seal the bag
completely.
Place it in the plastic bag and seal the bag
completely.
3
Re-pack the printer.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Windows
Windows
®
and Windows NT
®
are registered trademarks of Microsoft Corporation in the U.S and other countries.
Apple Macintosh, iMac, LaserWriter and AppleTalk are registered trademarks of Apple Computer, Inc.
Hewlett-Packard, HP, PCL 5e, PCL 6, PCL, HP/UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company.
UNIX is a trademark of UNIX Systems Laboratories.
Adobe, Adobe logo, Acrobat, PostScript and PostScript3 are trademarks of Adobe Systems Incorporated.
Netware is a trademark of Novell, Inc.
E
Hewlett-Packard, HP, PCL 5e, PCL 6, PCL, HP/UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company.
UNIX is a trademark of UNIX Systems Laboratories.
Adobe, Adobe logo, Acrobat, PostScript and PostScript3 are trademarks of Adobe Systems Incorporated.
Netware is a trademark of Novell, Inc.
E
NERGY
S
TAR
is a U.S. registered mark.
© 2003 TROY XCD Inc.
© 2003 PACIFIC SOFTWORKS INC
All other brand and product names mentioned in this Quick Setup Guide are registered
© 2003 PACIFIC SOFTWORKS INC
All other brand and product names mentioned in this Quick Setup Guide are registered
Compilation and Publication
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product
descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited
to typographical and other errors relating to the publication.
This product is designed for use in a Professional Environment.
descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited
to typographical and other errors relating to the publication.
This product is designed for use in a Professional Environment.
Shipment of the Printer