Brother HL-8050N Quick Setup Guide

7

Responsible Party:

Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911
USA
Telephone:  (908) 704-1700

declares, that the products

Product name:

Laser Printer

Model number:

HL-8050N

Product options: 

All

complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that 
may cause undesired operation.

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:  

–

Adjust or relocate the receiving antenna.

–

Increase the distance between the equipment and receiver. 

–

Connect the equipment to an AC power outlet/socket on a circuit 
different from that which the receiver is already connected. 

–

Call the dealer or an experienced radio/TV technician for help. 

A shielded interface cable should be used in order to ensure compliance with 
the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries, Ltd. 
could void the user’s authority to operate the equipment. 

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du 
Canada.

The purpose of the International E

NERGY

 S

TAR

®

 Program is to promote the 

development and popularization of energy-efficient office equipment.
As an E

NERGY

 S

TAR

®

 Partner, Brother Industries, Ltd. has determined that this 

product meets the E

NERGY

 S

TAR

®

 guidelines for energy efficiency. 

This printer is certified as a Class I laser product under the U.S. Department 
of Health and Human Services (DHHS) Radiation Performance Standard 
according to the Radiation Control for Health and Safety Act of 1968. This 
means that the printer does not produce hazardous laser radiation. 

Since radiation emitted inside the printer is completely confined within 
protective housings and external covers, the laser beam cannot escape from 
the machine during any phase of user operation. 

U.S. Food and Drug Administration (FDA) has implemented regulations for 
laser products manufactured on and after August 2, 1976. Compliance is 
mandatory for products marketed in the United States. The label shown on 
the back of the printer indicates compliance with the FDA regulations and 
must be attached to laser products marketed in the United States.

☛

 Caution:

Use of controls, adjustments or the performance of 
procedures other than those specified in this manual may 
result in hazardous radiation exposure. 

This printer is a Class 1 laser product as defined in IEC 60825 specifications. 
The label shown below is attached in countries where required.

This printer has a Class 3B laser Diode that emits invisible laser radiation in 
the Scanner Unit. The Scanner Unit should not be opened under any 
circumstances. 

☛

 Caution:

Use of controls, adjustments or performance of 
procedures other than those specified in this manual may 
result in hazardous radiation exposure.

Brother Industries Ltd., 
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japan

Herewith declare that:

Products description:

Laser Printer

Product Name:

HL-8050N

is in conformity with provisions of the R & TTE Directive (1995/5/EEC 
2002) and we declare compliance with the following standards:

R&TTE: EN300330-2 

V1.1.1

EN301489-3 V1.3.1
CE0682 

Safety: EN60950: 

2000

EMC: 

EN55022: 1998 + A1: 2000 Class B
EN55024: 1998
EN61000-3-2: 1995 + A14: 2000
EN61000-3-3: 1995

Year in which CE marking was First affixed: 2003

Issued by: 

Brother Industries, Ltd.

Date:

7 July, 2003

Place:

Nagoya, Japan

Signature: 

Takashi Maeda
Manager
Quality Management Group
Quality Management Dept.
Information & Document Company

MANUFACTURED:
Brother Industries, Ltd., 
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 
CFR subchapter J.

CLASS 1LASERP RODUCT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT

!