Brother mfc-9160 Quick Setup Guide
Version A
Press and slide
Load the paper
with the lever down
with the lever down
THANK YOU!
… FOR PURCHASING YOUR BROTHER MACHINE.
WE ARE SURE YOU WILL BE IMPRESSED WITH THE
CONVENIENT WAY THAT YOUR NEW MACHINE PERFORMS SO
MANY TASKS WITH GREAT RESULTS!
WE ARE SURE YOU WILL BE IMPRESSED WITH THE
CONVENIENT WAY THAT YOUR NEW MACHINE PERFORMS SO
MANY TASKS WITH GREAT RESULTS!
Follow these simple instructions in numerical order.
For greater detail, consult your Owner’s Manual and CD-ROM.
Alternatively, if you cannot solve a problem:
Refer to Frequently Asked Questions (FAQ’s) on Brother Solutions
Web Site:
Refer to Frequently Asked Questions (FAQ’s) on Brother Solutions
Web Site:
URL: http://solutions.brother.com
Call Brother Customer Service at: 0161 931 2354
Packing List
Keep the packing materials for possible future transport. If you do not pack the machine properly, it may
void your warranty.
void your warranty.
Drum Unit Assembly
Owner’s Manual
Brother Quick
Setup Guide
Setup Guide
Paper Support
IEEE-1284 Compliant
Bi-directioned Cable
Mains Power Cord
CD-ROM
For USB Cable
Cable Tie
Starter Sheet
Do NOT remove
the Starter Sheet!
the Starter Sheet!
Mains Power Cord
(Example for
the U.K.)
the U.K.)
A.
Attach the paper support to
the multi-purpose sheet
feeder.
the multi-purpose sheet
feeder.
B.
Pull out the paper tray and
the extension.
the extension.
C.
If your paper size is A4 or
Letter, extend the paper
stopper by pulling it toward
you.
Letter, extend the paper
stopper by pulling it toward
you.
(For A4 and Letter paper)
– 1 –
MFC-9160
Quick Setup Guide
2
3
1
4
Attach the Plastic Support
and Pull out the Paper Tray
and Pull out the Paper Tray
Install the Drum Unit
Load Paper
5
Install Mains Power Cord
A.
Adjust the guides to the position for the paper
size you are using.
size you are using.
B.
Fan the paper well.
A.
Unpack the drum unit assembly, and gently
rock it from side to side five or six times to
distribute the toner evenly inside the
cartridge.
rock it from side to side five or six times to
distribute the toner evenly inside the
cartridge.
B.
Open the top cover of the machine by pulling
the lever toward you and lifting the cover.
the lever toward you and lifting the cover.
To prevent damage to the drum, do not
expose it to light for longer than a few
minutes.
expose it to light for longer than a few
minutes.
Do NOT remove the clear plastic starter
sheet this will be ejected while the machine
is warming up.
sheet this will be ejected while the machine
is warming up.
C.
Holding the drum unit by its handles, insert it
into the machine.
into the machine.
C.
Push down the paper lever. Load the paper
(with the lever down). Make sure the print
side is toward the fax machine and the paper
level is stacked below the paper mark. The
feeder can hold up to 200 sheets of paper, or
up to 10 envelopes.
(with the lever down). Make sure the print
side is toward the fax machine and the paper
level is stacked below the paper mark. The
feeder can hold up to 200 sheets of paper, or
up to 10 envelopes.
Turn the power switch ON.
Complete reading this guide before connecting the Parallel or USB
cables.
cables.
D.
Close the top cover.