Jet 16-32 plus User Manual
6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model 22-44 Plus Drum Sander. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
for a JET Model 22-44 Plus Drum Sander. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model Number .......................................................................................................................... 22-44 Plus
Stock Number.............................................................................................................................. 649003K
Maximum Width (in.) ......................................................................................................... 44 (two passes)
Minimum Length (in.) ......................................................................................................................... 2-1/4
Maximum Thickness (in.) ......................................................................................................................... 4
Minimum Thickness (in.) ..................................................................................................................... 1/32
Drum Size (in.)................................................................................................ 5 x 22 Extrusion, Aluminum
Drum Speed (RPM) ........................................................................................................................... 1700
Dust Chute (in.) ....................................................................................................................................... 4
Conveyor Motor ................................................................................... 43 inch-lb. torque, direct drive D.C.
Conveyor Variable Feed Rate (FPM) ............................................................................. 0-10 (SandSmart)
Motor (TEFC)...................................................................................................... 1-3/4HP, 1Ph, 115V only
Net Weight (lbs.) .................................................................................................................................. 231
Shipping Weight (lbs.).......................................................................................................................... 254
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.