Argox AS-8000 User Guide

The ArgoxScan can automatically scan barcode at a distance. 

Simply aim and pull the trigger. Code scanning is performed 

along the center of the light bar emitted from the reading 

window. This bar must cover the entire code. 

Successful scanning shall be obtained by tilting the scanner 

with respect to the barcode to avoid direct reflections that 

impair the reading performance. 

Recommended Steps 
When the required settings have been configured, all settings 
are stored in non- volatile memory of scanner after reading 
EXIT Label. Recommended steps are as follows. 
1)  Host interface will be automatically detected. User does 

not need to set host interface for the scanner. 

2)  Set interface to optimize protocol of scanner with your 

host in interface section. 

3)  Set system control of scanner, such as specific 

adjustments double confirm, power saving, indicator 
and scanning mode which you prefer usage in system 
control section. 

4)  Set code options of scanner for your usage in code 

option section. You must make sure to enable the 
symbology first, then Min./Max. code length, code ID 
checksum and truncate digits are also converted. 

5)  Set string format of the scanner, such as preamble, 

postamble Prefix, suffix, code ID and code name 
transmission for your application in string format 
section. 

further information.