Sony kdl-32xbr4 Operating Guide
F:\Worker\SONY WAX3 D-series EN 131\3212313131\050GET.fm
masterpage:Left
12
KDL-32XBR4/KDL-40D3000
This TV can be installed on a wall by using a Wall-
Mount Bracket (sold separately). Before mounting
the TV on a wall, the Table-Top Stand must be
removed from the TV.
Mount Bracket (sold separately). Before mounting
the TV on a wall, the Table-Top Stand must be
removed from the TV.
~
• Do not remove the Table-Top Stand for any reason
other than to wall-mount the TV.
Follow the simple steps below to remove the
Table-Top Stand:
Table-Top Stand:
1
Disconnect all the cables from the TV.
2
Gently lay the TV, face down, onto a level and
stable surface covered with a thick and soft
cloth. Make sure the Table-Top Stand is
hanging over the edge.
stable surface covered with a thick and soft
cloth. Make sure the Table-Top Stand is
hanging over the edge.
3
Remove the screws as shown in the
illustration for your model and pull the Table-
Top Stand out.
illustration for your model and pull the Table-
Top Stand out.
4
Do not remove any other screws from the TV.
~
• Be sure to store the removed screws and Table-Top
Stand in a safe place until you are ready to reattach the
Table-Top Stand. Keep the screws away from small
children.
Table-Top Stand. Keep the screws away from small
children.
• For bracket installation, refer to the instruction guide
provided by the Wall-Mount Bracket model for your
TV. Sufficient expertise is required in installing this
TV, especially to determine the strength of the wall for
withstanding the TV’s weight.
TV. Sufficient expertise is required in installing this
TV, especially to determine the strength of the wall for
withstanding the TV’s weight.
• For product protection and safety reasons, Sony
strongly recommends that you use the Wall-Mount
Bracket model designed for your TV and the wall-
mounting of your TV should be performed by a
Sony dealer or licensed contractor.
Bracket model designed for your TV and the wall-
mounting of your TV should be performed by a
Sony dealer or licensed contractor.
Preparation for Wall-Mounting
Model: KDL-40D3000
Remove 4 designated screws only.
Level surface
covered with a
soft cloth
covered with a
soft cloth
Table-Top
Stand
Stand
Model: KDL-32XBR4
Remove 3 designated screws only.
Level surface
covered with a
soft cloth
covered with a
soft cloth
Table-Top
Stand
Stand