OKI B930n User Manual

B930n User’s Guide> 95

Setting up the Macintosh 

Install the printer driver (Adobe PS) for Macintosh. Install the 
screen font if necessary. Connect the printre to the network 
and select Add Printer via the printer setup utility or Printers 
and Faxes and the Plus button. Select Other using the Print 
Menu and browse to select the B930n ppd. Add options 
installed on the printer.

The printer can be managed via a standard SNMP management 
station. The printer supports SNMP-v1, SNMP-v2c, MIB-II, Host 
Resources MIB, Printer MIB and OKI Data Private MIB. 

This section explains the precautions and limitations of using this 
printer with TCP/IP. 

Be very careful in setting up IP addresses which are 
controlled as an entire system. Consult your network 
administrator before performing any setup on IP addresses. 

Depending on the network environments, some require 
subnet mask and gateway to be set up. Consult your network 
administrator and set up the necessary items. 

Be very careful in setting up IP addresses which are 
controlled as an entire system. Consult your network 
administrator before performing any setup on IP addresses. 

Before performing any network setup (such as the IP 
address) to a host running under NIS (Network Information 
Service), consult the NIS administrator. 

When setting a UNIX workstation, note the following also: