OKI ML490 User Guide
Maintenance
55
Bits of Paper Stuck in the Paper Path
1 Turn off the printer.
1 Turn off the printer.
2 Use the platen knob to back the paper all the way out of the
printer.
CAUTION!
Make sure the printer is turned off before you open the access
cover.
Make sure the printer is turned off before you open the access
cover.
3 Open the access cover (1) and remove the pull up roller
assembly (2). Then grasp the tabs (3) on the sheet guide (4)
and lift it off the printer.
and lift it off the printer.
Rear-Feed, Repeating Paper Jams
If the paper keeps jamming, you may have:
• defective paper
• misaligned paper
• bits of paper stuck in the paper path
Defective Paper
Replace the paper with a fresh stack.
Replace the paper with a fresh stack.
Misaligned Paper
1 Turn off the printer.
1 Turn off the printer.
2 Use the platen knob to back the paper all the way out of the
printer.
3 Tear off a couple of sheets of paper, leaving a new, clean,
square-cut edge.
4 Reload the paper and turn the printer back on.