OKI oj2500 User Manual
12
1
Setup
Print the Demo Page
We recommend that you run a demo print whenever the
printer is moved or the ink cartridge is replaced.
printer is moved or the ink cartridge is replaced.
The printer does not need to be attached to a host
computer to perform this demo.
computer to perform this demo.
1. Make sure that at least 4 sheets of paper are loaded and
that the printer is turned on (Power LED lit: if not, press
Power/Reset button).
Power/Reset button).
2. Press and hold the Resume/FF button for approximately 2
to 5 seconds, until the green LED flashes. The demo
prints.
prints.
If the demo fails to print, repeat steps 1 and 2.
If the demo page shows streaks or missing colors,
press and hold the Cartridge Clean button to start
the cartridge cleaning process.
press and hold the Cartridge Clean button to start
the cartridge cleaning process.