Milan mil-s1000 User Manual
Appendix B. Pin Assignments
RJ-45 station ports can be attached to any device which
use a standard network interface (e.g., a workstation,
server, bridge or router). RJ-45 daisy-chain ports can be
cascaded to a station port on similar networking devices
(e.g., another switch or hub). Use unshielded twisted-pair
(UTP) for RJ-45 connections: 100 ohm Category 3,4 or 5
cable for 10Mbps connections or 100 ohm Category 5
cable for 100Mbps connections. Also be sure that the
length of any twisted-pair connection does not exceed 100
meters (328 feet).
use a standard network interface (e.g., a workstation,
server, bridge or router). RJ-45 daisy-chain ports can be
cascaded to a station port on similar networking devices
(e.g., another switch or hub). Use unshielded twisted-pair
(UTP) for RJ-45 connections: 100 ohm Category 3,4 or 5
cable for 10Mbps connections or 100 ohm Category 5
cable for 100Mbps connections. Also be sure that the
length of any twisted-pair connection does not exceed 100
meters (328 feet).
1
2
3
4
5
6
7
8
T D
R D
T D
R D
Figure B-1. RJ-45 Connector
Pin
Pin Station Ports 1 ~ 8
Cascade Ports
1
Receive Data +
Transmit Data +
2
Receive Data -
Transmit Data -
3
Transmit Data +
Receive Data +
6
Transmit Data -
Receive Data -
4,5,7,8
Not Used
Not Used
Table B-1. RJ-45 Pin Assignments