Raymond Weil 4878-stc-00668 User Guide
I N S T R U C T I O N S F O R U S E
S E L F - W I N D I N G
C H R O N O G R A P H W A T C H E S
RAYMOND WEIL S.A.
Avenue Eugène-Lance 36-38
P.O. Box 1569
1211 Geneva 26
Switzerland
Tel: +41 (0) 22 884 00 55
Fax: +41 (0) 22 884 00 50
Avenue Eugène-Lance 36-38
P.O. Box 1569
1211 Geneva 26
Switzerland
Tel: +41 (0) 22 884 00 55
Fax: +41 (0) 22 884 00 50
G E N E R A L I N F O R M A T I O N
info@raymond-weil.ch
info@raymond-weil.ch
A F T E R S A L E S S E R V I C E
customer-service@raymond-weil.ch
customer-service@raymond-weil.ch
W E B S I T E
www.raymondweil.com
www.raymondweil.com
INTRODUCTION
e congratulate you on having chosen a watch
W
from the prestigious RAYMOND WEIL collection,
the living expression of masterful design and of
the living expression of masterful design and of
the continuous quest for top quality, which have been the
hallmarks of the Brand since its creation.
hallmarks of the Brand since its creation.
Your watch is fitted with a RAYMOND WEIL self-winding
chronograph movement calibre RW 7200 or 7300,
hand-assembled by our master watchmakers according
to the most rigorous quality standards of the Swisswatch
industry.
chronograph movement calibre RW 7200 or 7300,
hand-assembled by our master watchmakers according
to the most rigorous quality standards of the Swisswatch
industry.
In order to guarantee the perfect functioning of your
RAYMOND WEIL watch for many long years, we thank
you to pay close attention to the advice contained in
these Instructions for Use as well as in the International
Guarantee booklet.
RAYMOND WEIL watch for many long years, we thank
you to pay close attention to the advice contained in
these Instructions for Use as well as in the International
Guarantee booklet.
DESCRIPTION OF THE DIAL
WATCH HANDS
HOUR
MINUTE
SECONDS
HAND
HAND
HAND
PUSH-BUTTON A:
- START
- STOP
- START
- STOP
SETTING CROWN
PUSH-BUTTON B:
-ZERO RESET
-ZERO RESET
30 MINUTES
60 SECONDS
12 HOURS
DATE
COUNTER
COUNTER
COUNTER
CHRONOGRAPH HANDS
Certain RAYMOND WEIL chronographs are also equipped
with a tachometric scale, enabling the measurement of
speed in km/hr or other units.
with a tachometric scale, enabling the measurement of
speed in km/hr or other units.
CHANGING THE DATE AND SETTING THE TIME
1 Normal or winding position
2 Rapid date change
3 Time-setting
2 Rapid date change
3 Time-setting
Your RAYMOND WEIL watch may be fitted with a
screw-down crown. Before setting the time or changing
the date, it is therefore necessary to unscrew the crown
by pulling it straight out and turning it anti-clockwise.
The crown will then be released by a spring. After
completing all settings, press lightly on the crown,
while turning it clockwise, and screw it back in gently
in order to preserve your watch’s water-resistance.
screw-down crown. Before setting the time or changing
the date, it is therefore necessary to unscrew the crown
by pulling it straight out and turning it anti-clockwise.
The crown will then be released by a spring. After
completing all settings, press lightly on the crown,
while turning it clockwise, and screw it back in gently
in order to preserve your watch’s water-resistance.
CHANGING THE DATE
In order to adjust the date rapidly, pull the crown out to
position 2. Then, depending on the model of your watch,
turn the crown forwards or backwards until the desired
date appears in the window located at:
position 2. Then, depending on the model of your watch,
turn the crown forwards or backwards until the desired
date appears in the window located at:
- 12 o’clock for models fitted with an RW 7200 calibre;
- 4 o’clock for models fitted with an RW 7300 calibre.
The date changes as the hour hand passes midnight.
During this operation, your watch will continue to function
and so will not need to be reset.
During this operation, your watch will continue to function
and so will not need to be reset.
Do not change the date when the watch is showing a time
between 10 pm and 2 am. The watch’s automatic date
change mechanism engages during this time period and
the movement could be damaged.
between 10 pm and 2 am. The watch’s automatic date
change mechanism engages during this time period and
the movement could be damaged.
After finishing your changes, always push the crown
back in to position 1, in order to preserve your watch’s
water-resistance.
back in to position 1, in order to preserve your watch’s
water-resistance.
1/2