Milan mil-sm4804g User Manual
1-1
Chapter 1: Introduction
Overview
The MIL-SM4804G switch is a stackable Fast Ethernet switch with 48 10BASE-T/
100BASE-TX ports, and two 1000BASE-T ports
100BASE-TX ports, and two 1000BASE-T ports
1
that operate in combination with
two Small Form Factor Pluggable (SFP) transceiver slots. These switches also
provide two 1 Gbps built-in stacking ports for connecting up to four MIL-SM4804G
units in a stack. The stacking ports can also be used as normal Ethernet ports in
standalone mode. The switch also includes an SNMP-based management agent,
which provides both in-band and out-of-band access for managing the switch.
provide two 1 Gbps built-in stacking ports for connecting up to four MIL-SM4804G
units in a stack. The stacking ports can also be used as normal Ethernet ports in
standalone mode. The switch also includes an SNMP-based management agent,
which provides both in-band and out-of-band access for managing the switch.
The MIL-SM4804G provides a broad range of powerful features for Layer 2
switching, delivering reliability and consistent performance for your network traffic.
They bring order to poorly performing networks by segregating them into separate
broadcast domains with IEEE 802.3Q compliant VLANs, and empowers multimedia
applications with multicast switching and CoS services.
switching, delivering reliability and consistent performance for your network traffic.
They bring order to poorly performing networks by segregating them into separate
broadcast domains with IEEE 802.3Q compliant VLANs, and empowers multimedia
applications with multicast switching and CoS services.
Figure 1-1 Front and Rear Panels
1. If an SFP transceiver is plugged in, the corresponding RJ-45 port (25-26 or 49-50) is disabled.
RPS
DC
12V 4.5A
Console
10/100 Mbps RJ-45 Ports
Port Status Indicators
Stacking Ports
1000BASE-T/SFP Ports
System Indicators
Power Socket
Redundant Power Socket
Console Port