Milan mil-sm4804g User Manual

Page of 68
Mounting
3-5
3
So montieren Sie Geräte an ein Rack:
1. Befestigen Sie die Metallwinkel mit den im Metallwinkel-Montageset erhältlichen 
Schrauben an dem Gerät.
2. Befestigen Sie das Gerät mit vier Rackmontageschrauben (nicht beigelegt) an dem 
Rack.
3. Wenn Sie nur einen Switch installieren, dann springen Sie bitte über zu "Verbinden mit 
einer Stromquelle" auf Seite 3-8 am Ende dieses Kapitels.
4. Wenn Sie mehrere Switches installieren möchten, dann montieren Sie sie 
untereinander in einer beliebigen Reihenfolge.
Desktop or Shelf Mounting
1.
Attach the four adhesive feet to the bottom of the first switch.
Figure 3-4  Attaching the Adhesive Feet
2.
Set the device on a flat surface near an AC power source, making sure there 
are at least two inches of space on all sides for proper air flow.
3.
If installing a single switch only, go to “Connecting to a Power Source” at the 
end of this chapter.
4.
If installing multiple switches, attach four adhesive feet to each one. Place each 
device squarely on top of the one below, in any order.
5.
If also installing an RPS, place it close to the stack.