Philips mrd210 User Guide
22
English
Tuning to radio stations
1
Press STANDBY ON
y
to switch on the last selected
source.
2
Press SOURCE (or TUNER on the remote) to select
TUNER mode.
TUNER mode.
3
Press TUNER again to select the desired band : FM or AM.
4
Press and hold
S or T until the frequency indication
starts to change, then release.
➜ The system automatically tunes to the next strong radio
station.
➜ The system automatically tunes to the next strong radio
station.
● To tune to a weak station, press S or T briefly and
repeatedly until an optimal reception is found.
5
Repeat step 4 if necessary until you find the desired radio
station.
station.
Presetting radio stations
You can preset up to 40 stations regardless of the
reception.
reception.
1
Tune to your desired radio station (refer to “Tuning to
radio stations
radio stations
”.)
2
Press PROGRAM.
➜ “Program” icon appears.
➜ “Program” icon appears.
3
Use the numeric keypad (0-9) to select the desired
preset number.
➜ If “Program” icon goes off before you select the desired
preset number, press PROGRAM again.
preset number.
➜ If “Program” icon goes off before you select the desired
preset number, press PROGRAM again.
Program
4
Press PROGRAM again to store the radio station.
● Repeat steps 1–4 to store other radio stations.
Helpful Hints:
– If you attempt to program more than 40 preset radio
stations, “
– If you attempt to program more than 40 preset radio
stations, “
FULL” is displayed.
– During programming, if no key is pressed within five
seconds, the system will exit the program mode automatically.
seconds, the system will exit the program mode automatically.
Listening to preset radio
stations
stations
● In tuner mode, press 1 or 2 or use the numeric keypad
(0-9) to select the desired preset number.
➜ The preset number, radio frequency, and waveband are
displayed.
➜ The preset number, radio frequency, and waveband are
displayed.
Sleep timer setting
The sleep timer enables the system to switch to standby
mode automatically at a preset time.
mode automatically at a preset time.
1
Press SLEEP on the remote repeatedly to select a preset
time.
➜ The selections are as follows (time in minutes):
time.
➜ The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15...
2
When you reach the desired length of time, stop pressing
the SLEEP button.
➜ “Sleep” icon appears.
the SLEEP button.
➜ “Sleep” icon appears.
To check the remaining length of time after sleep
timer is activated
timer is activated
● Press SLEEP once.
To change the preset sleep timer
● Press SLEEP again while the remaining sleep timer is
shown.
➜ The display will show the next sleep timer options.
➜ The display will show the next sleep timer options.
To deactivate the sleep timer
● Press SLEEP repeatedly until "OFF" is displayed, or press
the STANDBY ON
y
button.
Radio Reception/Sleep Timer
R
ADIO
R
ECEPTION
/S
LEEP
T
IMER