Cobra esd9230 Operating Guide

You will get optimum performance from your
ESD-9230 WX if you mount it at a point
approximately in the center of the vehicle,
as low as possible on the front windshield
without obstructing the unit's view of the
road either to the front or rear. You can also
mount it directly on the dashboard. 

The unit's lenses must not be blocked and
the LaserEye

®

should have a clear view out

the back window to allow 360° detection.

Radar and laser signals pass through glass
but not through other materials and objects.
Objects that can block or weaken incoming
signals include: 

windshield wiper blades

mirrored sun screens

dark tinting at the top of the 
windshield

heated windshields currently available 
on some vehicles (Instaclear for Ford,

5. To adjust the angle if necessary, 

gently push or pull on the bracket 
to bend it. DO NOT use the 
detector to bend the bracket.

6. Plug the power cord into the detector.

7. Plug the cigarette lighter adapter on 

the power cord into your vehicle's
cigarette lighter.

8. You can temporarily remove the 

detector whenever you wish by 
sliding it off of the bracket.

1. Attach the rubber cups to the bracket.

2. Make sure the rubber cups and 

your windshield are clean.

3. Push the bracket firmly onto 

the windshield.

4. Attach the detector to the bracket. 

Check the angle of the unit.

Windshield mounting

Dashboard mounting