Cobra 148nwst User Manual
Operation
Operation
23
22
External Speaker
External Speaker
The external speaker jack is used for remote
receiver monitoring.
receiver monitoring.
Note
The external speaker should
have 8-ohm impedance and b e
rated to handle at least 4.0
watts.When the external speak-
er is plugged in,the internal
speaker is automatically discon-
nected.
have 8-ohm impedance and b e
rated to handle at least 4.0
watts.When the external speak-
er is plugged in,the internal
speaker is automatically discon-
nected.
Note
Cobra external speakers are
rated at 10 watts. See
Accessories page 39.
rated at 10 watts. See
Accessories page 39.
Connect an external speaker to the external
speaker jack on the rear panel.
speaker jack on the rear panel.
1
PA (Public
Address)
Address)
PA (Public Address)
Connect an external PA speaker to the PA jack
on the rear panel.
on the rear panel.
Set CB/PA switch to PA position.
Note
Speaker should have 8-ohm
impedance and be rated to
handle at least 4.0 watts.
impedance and be rated to
handle at least 4.0 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
away from the microphone to
prevent acoustic feedback.
Note
Activity on the CB channel will
be heard through the PA speak-
er. Adjust volume control to a
normal listening level.
be heard through the PA speak-
er. Adjust volume control to a
normal listening level.
1
2
148 NW ST manual 3.3 6/15/99 3:12 PM Page 22