Transcend 520 - 1gb User Manual

 

13

There are 3 kinds of the voice source for recording: FM, Line-In, and the built-in Microphone. 

About the FM recording, the previous section has already mentioned. 

As for how to select the voice source (Line-In or the built-in Microphone) for recording, please see 

the sub-section “Select Recording Device Mode” of the section “Settings” for details. 

1.  Once you have pre-selected the recording device, you can begin voice recording. 

2.  Notice that you should not play any files before recording. 

3. Press 

the 

A-B/REC 

  button, and then the voice from the selected device will start recording. 

4.  If you select the Line-In to be the recording device. On the display, a recording Line-In file is 

generated and placed in the folder name of [/LINEIN.DIR/]. The recording file name sequence 

starts at [LINE0001.WAV], then [LINE0002.WAV], and so forth. 

 

5.  If you select the built-in Microphone to be the recording device. On the display, a recording 

Microphone file is generated and placed in the folder name of [/MICIN.DIR/]. The recording file 

name sequence starts at [MIC00001.WAV], then [MIC00002.WAV], and so forth. 

 

6. Press the PLAY-PAUSE/PWR ON 

 button to pause the recording, and press the 

PLAY-PAUSE/PWR ON 

  button again to continue. 

7. Press the A-B/REC 

  button again to stop the recording and the display will return to the 

VOICE mode screen. 

 

Sample rate 

Channels 

512MB 

1GB 

8 KHz 

2（stereo） 

16 hrs 

32 hrs 

16 KHz 

2（stereo） 

8 hrs 

16 hrs 

Line-In Record 

32 KHz 

2（stereo） 

4 hrs 

8 hrs 

 

Sample rate 

Channels 

512MB 

1GB 

Microphone 

Record 

8 KHz 

1（Mono） 

32 hrs 

64 hrs