Runco cl-410 User Guide

Runco CL-410 and CL-420 Owner’s Operating Manual

1.1
About This Manual

This Owner’s Manual describes how to install, set up and operate the Runco CL-410 and
CL-420 DLP Projectors. Throughout this manual, the Runco CL-410 and CL-420 DLP
Projectors are referred to collectively as the “CL-410/CL-420.” The information in this
manual applies to both projectors except where otherwise indicated.

Target Audience

Runco has prepared this manual to help home theater installers and end users get the
most out of the CL-410/CL-420.

Runco has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Runco product manuals on-line, at www.runco.com.

If You Have Comments
About This Manual...

Runco welcomes your comments about this manual. Send them to techpub@runco.com.

Textual and Graphic
Conventions

Text Conventions: The following conventions are used in this manual, in order to clarify
the information and instructions provided:

• Remote and built-in keypad button identifiers are set in upper-case bold type; for

example, “Press EXIT to return to the previous menu.”

• Computer input (commands you type) and output (responses that appear on-screen) is

shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Letterbox, type

RRD02

.”

• All keys with functional names are initial-capped, set in bold type and enclosed in angle

brackets. These keys are the following:

<Enter>, <Spacebar>, <Control>,

<Esc>

and

<Tab>

•

<Enter>

indicates that you may press either the RETURN or ENTER key on your

keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used
to highlight important information, as in this example:

1. Introduction

A carriage return

must be used after each command or string.

Note