Runco cl-410 User Guide
Runco CL-410 and CL-420 Owner’s Operating Manual
37
Select Color from the Picture Adjust menu. While looking at the color bar pattern through
a blue filter, adjust the color saturation level until the outermost (gray and blue) color bars
appear to be a single shade of blue:
a blue filter, adjust the color saturation level until the outermost (gray and blue) color bars
appear to be a single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image
appears greener. To set the tint, select Tint from the Picture Adjust menu. While looking at
the color bar pattern through a blue filter, adjust the tint level until the cyan and magenta
color bars (on either side of the green bar) appear to be a single shade of blue.
When tint is decreased, the image appears redder; when it is increased the image
appears greener. To set the tint, select Tint from the Picture Adjust menu. While looking at
the color bar pattern through a blue filter, adjust the tint level until the cyan and magenta
color bars (on either side of the green bar) appear to be a single shade of blue.
1. Like the brightness and contrast controls, the color and tint
controls are interactive. A change to one may require a subtle
change to the other in order to achieve the optimum setting.
change to the other in order to achieve the optimum setting.
2. Color and tint controls are not available on the HDMI or RGB-HD
inputs.
gray
yellow
cyan
gr
een
magenta
re
d
blue
Note