Garmin 3600a Installation Instruction

iQue 3600a Que Applications Guide

Selecting an Approach

When you select an approach, the destination airport

is replaced with the sequence of waypoints for the

selected approach. Keep in mind that the airport must

have a published approach (GPS, RNAV, VOR, NDB,

localizer, or ILS) and only the ﬁnal course segment

(usually from ﬁnal approach ﬁx to missed approach

point) of the published approach is available in the

iQue 3600a.

NOTE: The approaches provided in the

Jeppesen database are for monitoring purposes

only. The iQue 3600a is not an IFR-approved

instrument and should not be used as a primary

source of navigation guidance in instrument

conditions.

NOTE: When using a route, and on the ﬁnal leg

of the route to the destination airport, the Select

Approach option allows you to quickly retrieve

and select available approaches. This option

overrides your current route. The original route

is still available for later use.

To select an approach for the destination

airport:

1. While navigating to a destination, open the Go

To page or the Active Route page.

2. Press

MENU to open the options menu.

3. Highlight

Select Approach and press ENTER.

4. Use the

Rocker key to highlight the pick list

and press

ENTER.

Highlight and press

ENTER to open the

Approach list.

5. Highlight the approach you want to use from

the pop-up list and press

ENTER.

6. Highlight the

Select button and press ENTER.

7. A Vectors pop-up window appears. See

page

for more information on vectors to ﬁnal.

Use the

Rocker key to select Yes or No and

press

ENTER. The iQue 3600a removes the

destination airport from the Go To and replaces

it with the approach waypoints.

ASIC

VIATION

PERATION

ELECTING

PPROACH