Garmin 3600a Operating Guide

The first time you start the iQue handheld, setup instructions appear on the screen. These instructions include a calibration screen, 

or digitizer. Calibration aligns the internal circuitry of the handheld with its touch-sensitive screen so your handheld can detect 

stylus taps correctly. If you notice that the handheld does not respond properly when you tap the screen with the stylus, you may 

need to calibrate the screen again.

1.  Tap the 

Home (Applications Launcher) icon 

. Then tap the 

Prefs icon 

 (you may need to scroll down).

2.  In the   pick list in the upper right corner of the screen, tap 

Digitizer.

3.  Follow the on-screen instructions.

1.  Press the 

Power button to turn on the device.

2.  Press and hold the 

Power button until the backlight turns on or off. Then release the button.

1.  Tap the 

Backlight icon  , located in the Status Bar just below the text input area.

2.  Tap and drag the brightness adjustment slider to the desired level. Then tap 

Done.