Garmin m3 Quick Reference Card

 

Adjusting knobs Suction lever 

Suction 

cup

Pivoting joint rotates to the left or right

Cradle

1.  Loosen the adjusting knobs (shown above). Then 

extend the mount and retighten the knobs. 

2.  Clean and dry the windshield and the suction cup 

with rubbing alcohol.

3.  Make sure the suction lever is up (pulled away from 

the suction cup). Position the suction mount on your 

windshield. Press the suction cup firmly against the 

glass and rock it to remove as much air as possible. 

4.  Press the suction lever down toward the windshield.
5.  Gently slide the iQue M3 down into the cradle until it 

clicks into place.

6.  Loosen the adjustment knobs and re-position the 

mount, if necessary. Then tighten the knobs firmly.

To remove the suction mount from the windshield, pull the 

suction lever up away from the windshield. If necessary, 

pull the tab on the bottom of the suction cup toward you. 

If you encounter any difficulty while using your iQue 

M3, or if you have any questions, in the U.S.A. contact 

Garmin Product Support at 913/397.8200 or 800/800.1020, 

Monday–Friday, 8 AM–5 PM Central Time; or by e-mail at 

. In Europe, contact Garmin (Europe) 

Ltd. at 44/0870.8501241.