Garmin 10 User Guide
Dakota Series Owner’s Manual
Customizing the Dakota
Pointer, which indicates your
relationship to a course line leading
to the destination (
).
Compass—select Auto to switch
from an electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time. Select off to turn the
electronic compass off and use the
GPS compass.
NoTe: The compass auto setting
is unavailable for the Dakota 10.
Altimeter Setup
NoTe: Altimeter Setup is
unavailable with the Dakota 10.
Touch
Setup
>
Altimeter
.
Auto Calibration—allow the
altimeter to self-calibrate each time
you turn the Dakota on.
Barometer Mode—select Variable
Barometer Mode—select Variable
elevation (used when moving)
or Fixed elevation (used when
stationary, allowing the altimeter to
function as a standard barometer).
Pressure Trending—select when
Pressure Trending—select when
the pressure data is recorded. Touch
Save Always to record pressure data
every 15 minutes, even when the
Dakota is turned off. Touch Save
When Power on to record data only
when the Dakota is turned on. This
can be useful when you are watching
for pressure fronts.
Plot Type—select the elevation plot
Plot Type—select the elevation plot
type:
elevation/Time—records
elevation changes over a period
of time.
elevation/Distance—records
elevation/Distance—records
elevation changes over a
distance.
Barometric Pressure—records
Barometric Pressure—records
•
•
•