NorthStar 957 User Manual
Chapter 10 - Using Special Functions
957 Operator’s Manual, Rev. B
Page 119
Displaying alarm
messages
New alarm messages
The word NEW in the RECENT ALARMS box tells you that the
alarm shown hasn’t been “cleared” yet (see “Clearing alarms”
below). There may also be other uncleared alarms.
alarm shown hasn’t been “cleared” yet (see “Clearing alarms”
below). There may also be other uncleared alarms.
Recent alarm messages
The 957 keeps a record of the one most recent alarm from
each main category (anchor, avoidance, communications,
cross track, and waypoints). This lets you “browse” through
the older alarm messages. Each successive press of the CLEAR
ALARM menu key will show you the most recent alarm
message from each category.
each main category (anchor, avoidance, communications,
cross track, and waypoints). This lets you “browse” through
the older alarm messages. Each successive press of the CLEAR
ALARM menu key will show you the most recent alarm
message from each category.
Clearing alarms
Clearing an alarm means removing the flashing alarm icon as
well as the word NEW from the display of that alarm on the
well as the word NEW from the display of that alarm on the
ALARMS screen. To manually clear an alarm (or to see other
alarms that may need clearing), press the CLEAR ALARM key
on the ALARMS screen.
alarms that may need clearing), press the CLEAR ALARM key
on the ALARMS screen.
There are two types of alarms:
•
“Auto-clear” alarms - These automatically clear after the
alarm condition disappears, or in some cases, after a short
time-out period (typically about 10 seconds). Most alarms
alarm condition disappears, or in some cases, after a short
time-out period (typically about 10 seconds). Most alarms