NorthStar 957 User Manual
Page 134
957 Operator’s Manual, Rev. B
Chapter 10 - Using Special Functions
will temporarily disappear until you acknowledge the
question.
question.
Turning the video
image on and off
To see the video image, press the VIDEO key. To turn it off,
press VIDEO again. If you’re displaying the optional ECHO
press VIDEO again. If you’re displaying the optional ECHO
SOUNDER screen, first press MORE, then press VIDEO.
NOTE:
If the video source isn’t connected or isn’t working properly, color bars will
be shown instead of a video image
be shown instead of a video image
Adjusting the
video’s
transparency
To adjust the video’s transparency, press the IN and OUT keys.
Pressing OUT lets you “see through” more of the video to the
screen underneath; pressing IN will make the video more
opaque. (If you’re displaying the CHART screen or 3D STEER
screen, the IN and OUT keys are reserved for zooming. You
must display a different screen, press IN or OUT, then return to
those screens.)
Pressing OUT lets you “see through” more of the video to the
screen underneath; pressing IN will make the video more
opaque. (If you’re displaying the CHART screen or 3D STEER
screen, the IN and OUT keys are reserved for zooming. You
must display a different screen, press IN or OUT, then return to
those screens.)