NorthStar 957 Installation Instruction
SECTION FOUR: Installing and wiring the 2701
957 Installation Manual, Revision C1
Page 27
Figure 11: 2701 case and mounting dimensions
Wiring the 2701
Connecting the 2701 to the
957
The 10-foot 957BDM-CA cable connects the 957 with the 2701.
Both ends of the cable are finished with connectors that plug
into the 2701 and 957. Plug the cable’s 25-pin connector into
the 2701, and the 7-pin connector into the 957 connector
labelled “GPS.”
Both ends of the cable are finished with connectors that plug
into the 2701 and 957. Plug the cable’s 25-pin connector into
the 2701, and the 7-pin connector into the 957 connector
labelled “GPS.”
In case you have to remove one of the cable’s connectors, be
sure to re-fabricate the cable using the wiring connections
described in the table below.
sure to re-fabricate the cable using the wiring connections
described in the table below.
Table 3: Wiring connections for 2701 cable
957 connector (7-pin)
2701 connector (25-pin)
Function
1
7
GPS RX1 (Blue)
2
21
BDM RX1 (Orange)