Garmin 225 Owner's Manual

56

The next submenu listing on the Auxiliary Menu is the proximity 

waypoints list. The proximity waypoints list lets you define an alarm circle
around a stored waypoint position, and can be used to help you avoid reefs,
rocks or restricted waters. Up to nine waypoints may be listed, with a 
maximum alarm radius of 99.9 nautical or statute miles or kilometers. The
alarm is turned on and off through the alarm/timer setup submenu.

To enter a proximity waypoint:

1. Highlight a blank proximity waypoint name field on the list and press 

C

.

2. Press the 

C

key to begin manually entering the waypoint name, or

3. Press the SCAN softkey to scan through all waypoints in memory.

4. Use the 

K

keypad to select the desired waypoint and press 

C

.

5. Press the OK softkey (twice if entering waypoint name manually). The radius

field will now be highlighted.

6. Press 

C

to begin entry of the proximity radius.

7. Use the 

K

keypad to enter a distance value and press 

C

.

To review a proximity waypoint from the list:

1. Use the 

K

key to highlight the waypoint to be reviewed.

2. Press the 

C

key.

3. Press the 

C

key again to return to the proximity list.

To remove a proximity waypoint from the list:

1. Use the 

K

key to highlight the waypoint to be removed.

2. Press the REMOVE softkey.

215225manb.qxd  4/27/00  9:22 AM  Page 56