Innovaphone IP110 Specification Guide
P u r e I P - T e l e p h o n y
Page - 1 -
Errors and omissions excepted. All information, technical specifications, and delivery times may be subject to change.
ts_IP110_en.doc, Issue: August 2008
Copyright © 2004-2008 innovaphone
®
AG
T e c h n i c a l S p e c i f i c a t i o n
IP phone IP110
Interfaces
Ethernet:
Ethernet:
2 x RJ 45 interface
10/100-BASE-TX (auto negotiation)
with internal 2 port switch
and Power over LAN, Class 1 (IEEE 802.3af)
Hardware
Power supply:
Power over LAN, Class 1 or
Mains adapter
Mains adapter
primary: 110-240 V, 50 Hz, 45mA,
secondary: 12V DC 800mA,
Memory:
8 MB DRAM
4 MB Flash
Operation environment:
Operation temperature:
0°C to +45°C,
Humidity:
10% to 90% non-condensing
Storage temperature:
-10°C to +70°C
Display:
128 x 64 Pixel - or - 7 lines with 21 characters
Keyboards:
numeric,
2 arrow keys,
4 free programmable function keys
volume and free speech keys
2 arrow keys,
4 free programmable function keys
volume and free speech keys
Protocols
DHCP
dynamic host configuration protocol - IP interfaces settings
ICMP
Internet control message protocol - for Ping tests
SNTP
simple network time protocol – to receive date and time values
LDAP
lightweight directory access protocol – access for LDAP compatible database
PPPoE
PPP over Ethernet – direct access to DSL modem
PPTP
point-to-point tunneling protocol – to setup VPN tunnels to the corporate network
MPPE
Microsoft point-to-point encryption - encryption in PPTP
NAT
network address translation – to translate official IP addresses in unofficial addresses and vice versa
(inclusive SIP und H.323)
(inclusive SIP und H.323)
HTTP
for configuration sing Web browser
SNMP
sending traps to the management software