Garmin 11 Owner's Manual

C

ONNECTING

 

THE

 GTM 11

•  GTM 11 with LED and mini-USB plug

•  Whip antenna (stiff antenna)

•  Wire antenna (flexible wire antenna) 

•  Hook-and-loop fasteners

•  Double-sided tape

You can use either the whip or wire antenna for your GTM 11. Use the 

traditional whip antenna for most installations. If you want to completely 

hide your GTM 11, use the wire antenna. Also, use the wire antenna if the 

whip antenna does not get an adequate signal strength. 
1.  Align the tab on the antenna with the front of the GTM 11.

2.  Snap the antenna onto the connector on the GTM 11. The 

antenna clicks indicating it is locked in place. You might have to 

wiggle it a bit to properly get it to click. 

To remove the antenna from the GTM 11, press the antenna connector’s 

tab. Pull the antenna off the GTM 11. 

Connect the mini-USB plug on the GTM 11 cable into the mini-USB 

connector on your Garmin GPS device. 

Connect your GPS device to external power. Turn the GPS device on, if it 

does not turn on automatically. 

  NOTE: When using the GTM 11, your Garmin GPS device must be 

connected to external power.