Intel E3300 AT80571RG0601ML Data Sheet

Product codes

AT80571RG0601ML

Datasheet

Introduction

The Intel

Celeron

processor E3x00 series is based on the Enhanced Intel

Core™

microarchitecture. The Intel Enhanced Core™ microarchitecture combines the

performance of previous generation Desktop products with the power efficiencies of a

low-power microarchitecture to enable smaller, quieter systems. The Intel Celeron

processor E3x00 series is a 64-bit processor that maintains compatibility with IA-32

software.

Note:

In this document, the Intel

Celeron

processor E3x00 series may be referred to as

"the processor."

Note:

In this document, unless otherwise specified, the Intel

Celeron

processor E3x00

series refers to the Intel

Celeron

processor E3300 and E3200.

The processors use Flip-Chip Land Grid Array (FC-LGA8) package technology, and plugs

into a 775-land surface mount, Land Grid Array (LGA) socket, referred to as the

LGA775 socket.

The processors are based on 45 nm process technology. The processors feature the

Intel

Advanced Smart Cache, a shared multi-core optimized cache that significantly

reduces latency to frequently used data. The processors feature an 800 MHz front side

bus (FSB) and 1 MB of L2 cache. The processors support all the existing Streaming

SIMD Extensions 2 (SSE2), Streaming SIMD Extensions 3 (SSE3), and Supplemental

Streaming SIMD Extension 3 (SSSE3). The processors support several Advanced

Technologies: Execute Disable Bit, Intel

64 architecture, and Enhanced Intel

SpeedStep

Technology.

The processor's front side bus (FSB) use a split-transaction, deferred reply protocol.

The FSB uses Source-Synchronous Transfer of address and data to improve

performance by transferring data four times per bus clock (4X data transfer rate).

Along with the 4X data bus, the address bus can deliver addresses two times per bus

clock and is referred to as a "double-clocked" or 2X address bus. Working together, the

4X data bus and 2X address bus provide a data bus bandwidth of up to 8.5 GB/s.

Intel has enabled support components for the processor including heatsink, heatsink

retention mechanism, and socket. Manufacturability is a high priority; hence,

mechanical assembly may be completed from the top of the baseboard and should not

require any special tooling.

1.1

Terminology

A ‘#’ symbol after a signal name refers to an active low signal, indicating a signal is in

the active state when driven to a low level. For example, when RESET# is low, a reset

has been requested. Conversely, when NMI is high, a nonmaskable interrupt has

occurred. In the case of signals where the name does not imply an active state but

describes part of a binary sequence (such as address or data), the ‘#’ symbol implies

that the signal is inverted. For example, D[3:0] = ‘HLHL’ refers to a hex ‘A’, and

D[3:0]# = ‘LHLH’ also refers to a hex ‘A’ (H= High logic level, L= Low logic level).

“Front Side Bus” refers to the interface between the processor and system core logic

(a.k.a. the chipset components). The FSB is a multiprocessing interface to processors,

memory, and I/O.