Hussmann fmss-l Data Sheet

5 

 

1 of 5 

FMSS-L 

Technical Data Sheet 

 
 

Rev A

       

 

 

Note: This data is based on store temperature and 
humidity that does not exceed 75F and 55% R.H.

 

Note: Not recommended to control temp by regulating 
coil temp allow t-stat to cycle and control temp. 

 

Btu/hr/ft*  
Parallel   

    800 

 

*For all refrigeration equipment other than Hussmann, 
use conventional Btu values. 
 

 

 

 

Merchandiser Drip Pipe (in.) 

1 ½* 

Merchandiser Liquid Line (in.) 

3/8* 

Merchandiser Suction Line (in.) 

5/8* 

 

Estimated Charge (lb)*** 

4ft 1.2 
5ft 1.5 
6ft 1.8 
 

*Dependent on case length and refrigerant type. 

 

*** This is an average for all refrigerants types.  Actual 
refrigerant charge may vary by approximately half a 
pound. 

 

 

 

 
 
 
 

 
These merchandisers are manufactured to meet ANSI/National Sanitation 
Foundation Standard #7 requirements.  

 
 
 
 
 
 
 
 
 
 
 
 
 

 

   

 CUL Listed 

 

 

 

  

     UL Sanitation 

We reserve the right to change or revise specifications and 
product design in connection with any feature of our 
products.  Such changes do not entitle the buyer to 
corresponding changes, improvements, additions or 
replacements for equipment previously sold or shipped.