Sherwood rd-8108 User Guide
ENGLISH
3 0
• The audio signal from the CD and the video signal
from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
enjoy them on the TV set and from the speakers.
Note : Be sure to observe the order of the above steps
1 and 2.
Start recording on the VIDEO 1.
3
Start play on the VIDEO 2 and the CD
respectively.
respectively.
4
DIGITAL AUDIO RECORDING WITH
For digital recording, select the desired
digital input as recording signal input.
digital input as recording signal input.
2
Select a desired input of CD, VIDEO 1~3
as a recording source.
as a recording source.
1
Start recording on the component
connected to OPTICAL DIGITAL OUT.
connected to OPTICAL DIGITAL OUT.
3
• Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD
recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original
signals. Refer to “ CONNECTING AUDIO/VIDEO COMPONENTS” and “CONNECTING DIGITAL INs and OUT”
on page 6 and 7 and the operating instructions of the MD recorder or CD recorder.
signals. Refer to “ CONNECTING AUDIO/VIDEO COMPONENTS” and “CONNECTING DIGITAL INs and OUT”
on page 6 and 7 and the operating instructions of the MD recorder or CD recorder.
Notes:
• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating
instructions of your digital recording equipment to know what restrictions are imposed.
AUTO
1
2
3
4
5
6
7
8
9
0
T.TONE
DSP
STEREO
POWER
AUDIO
VCR
SPK SET
ADJUST
M1
M2
M3
AUDIO SEL.
OSD
SETUP
SLEEP
DISPLAY
DIMMER
RETURN
P.SCAN
TUNER
CD
AUX
VIDEO1 VIDEO2 VIDEO3
TAPE
7CH DIR.
+10
TUNE
PRESET
ENTER
SUBTITLE
ZOOM
VOLUME
MUTE
CH SEL.
CH/LEVEL
MACRO
DVD
CABLE
SAT
CD
AUX
TV
STANDBY
PL
PARA.
MENU
UNIVERSAL REMOTE CONTROL
RNC-40
or
AUDIO
VIDEO
2
6
7
8
CD
VIDEO1 VIDEO2 VIDEO3
Start play on the desired input.
4
• Each time this button is pressed, the corresponding
input is selected as follows:
A(nalog)
c(oaxial) 1
c(oaxial) 2
o(ptical) 2
o(ptical) 1
Note : When the selected digital input is not
connected, “DIGITAL” indicator flickers.
There will be no recording as well as no sound.
There will be no recording as well as no sound.
DIGITAL
INPUTS
INPUTS