Planar m4pole-ps User Guide

Clean Pole Installation and User’s Guide (OM 720-02)    15

6.  Using a 5/16" wrench, remove the #6 kepnut from the aluminum retaining strap

across the top of the battery. Remove the strap.

7.  Use the yellow band to lift the battery from the chassis.

CAUTION

The battery is heavy and contains dangerous electrical energy.

1.  Place the yellow band around the new battery, and reinstall in the chassis, using the

yellow band to lift into place. Be sure that the battery terminals are placed on the
side of the black vertical pole.

2.  Reinstall the aluminum retaining band over the top of the battery, using the 5/16"

wrench to replace the #6 kepnut.

3.  Using the 7/16" wrench, reconnect the two black leads to the negative battery

terminal.

4. Using the 7/16" wrench, reconnect the two white leads to the positive battery

terminal.

5. Reassemble the top of the battery/charger case.

CAUTION

Be careful not to pinch the three wires from the LED/Siren switch
between the case top and the mounting brackets.

6. Reinstall the four Phillips pan head screws into the top of the battery/charger case.

7. Charge the battery if necessary.

The Clean Pole is now ready for use.